THE coat

It took me almost a month to take these photos. Finally, you get to see the famous coat I have been talking about for the last few months.

 

 

 

 Making a coat is not as easy as a pie. First, I chose a pattern I liked. Burda Style patterns usually fit me, so I didn't have to make any pattern changes, except lengthening the sleeves for a bit. That is also why I didn't make a coat muslin. Second, I did a whole research on a coat/jacket construction. Then I interfaced my coat for stability and underlined it for both stability and warmth. I also made quick tutorial on how and what to interface, and instructions how and what to underline. After that I started to sew the fabric into a coat. And here it is, at last. :)

How to underline a garment

Underlining reinforces open weaves, prevents transparency and adds support. It is basted 1.3 cm (1/2 in.) wide to shell prior to sewing and acts as a single layer. Seam allowances of underlining are then optionally trimmed to the stitched line to prevent bulk. If you want extra support or to protect critical areas that will receive a lot of stress from being bent and sat on (elbows, rumps), hand baste underlining to the body of  shell parallel to the grain of fabric.

Broadcloth, muslin, fine cotton batiste, china silk, silk organza, cotton/silk batiste blend, cotton flannel or fusible interfacing can be used to underline a garment. If you use fusible interfacing as underlining, fuse it to  shell proir to sewing. Seam allowances are optional.

I used cotton flannel, which will not only add support to my shell fabric, but also make the coat warmer.

1. Your pattern pieces should already be interfaced. I did a quick tutorial on this in the previous post.

2. Cut underlining pieces in the same size as pattern pieces. You don't have to underline pieces which are already interfaced. In any case, don't underline collars, lapels, pocket flaps, cuffs, etc.; those areas are usually interfaced.

3. Place the wrong side of underlining to the wrong side of shell fabric and pin it in the middle, parallel to the grain of the fabric.

4. Now it is time to adjust underlining for turn of cloth. That is the amount of space taken up by fabric's thickness when folded. This has to be done, if you want to avoid bulking of the underlining when you sew the pieces together and press the seam allowances apart. So, place your hand over pins, fold fabric over hand (underlining's overlap shows amount of adjustment needed for turn of cloth), then pin fabric and underlining near adjusted edges. Average turn of cloth will be 0.3 to 0.6 cm (1/8 to 1/4 inches) or more, if your fabric is thicker.

5. Trim underlining to the edge of shell fabric. Pin the other sides to shell as well.

6. Stitch underlining to shell fabric 1.3 cm (1/2 in.) wide with a basting stitch.

7. Optional: to prevent bulk in seams, trim underlining to the stitched line.

8. For extra support: draw lines 2 to 3 cm (3/4 to 1 1/8 in.) apart parallel to the grain of the fabric and hand baste underlining to shell fabric along the lines with stitches 2.5 to 3.5 cm (1 to 1 1/2 in.) long.

9. Trace over pattern's marks for pleats, buttonholes, darts, etc., and sew underlined pieces into a garment.

Interfacing a garment

Interfacing gives support and shape to e.g. collars, lapels, facing, cuffs, ... It is available as a sew-in fabric or a fusible fabric, woven or nonwoven. It is cut in the same size as pattern pieces and fused or basted directly to the shell fabric. Seam allowance is required for nonfusible interfacing and optional for fusible interfacing.

For a coat, usually the following pieces should be interfaced:

- front + front facing

- side front (if there is a pocket on the princess seam)

- upper back (shoulder area) + back/neck facing

- neckline and armhole seam allowances

- hems

- collar, lapel

- buttonhole areas

- pocket areas, pocket flaps, cuffs, waistband

For my coat, the pattern required to interface a coat front (including front facing) and front side, neck facing, and seam allowances on the neckline and armholes. I decided to use fusible interfacing, because it is much quicker to iron than sew on by hand. I used this one:

1. Preshrink both shell fabric and interfacing and cut the pattern pieces. Seam allowances are optional for fusible interfacing. Put a pressing cloth on the ironing board (to protect the ironing board). Place a piece of shell fabric down on it.

2. Place the adhesive side of the interfacing to the wrong side of the shell fabric. Ahesive side is usually a bit rough.

3. Place a pressing cloth over the fabric and interfacing (to protect the iron from getting dirty with interfacing's resin). Fuse the interfacing according to manufacturer's instructions. I, e.g., had to iron a piece on middle-high heat without steam. Some interfacings require steam.

4. Place the interfaced piece on an even grounding and leave it there to cool down.

5. Now, it is time to underline the shell fabric. Only after that you can trace over pattern's marks for pleats, buttonholes, darts, etc., and sew the pattern pieces into a garment.

I will be showing you how to underline a garment very soon!

Coat construction

I want a warm coat, so I did a little research on coat/jacket construction. There are 5 different fabric layers, each one has it's own purpose. Usually, 3 or 4 of them are used.

1. shell: the outer layer

- fashion fabric

2. underlining: reinforces open weaves, prevents transparency and adds support

- broadcloth, muslin, fine cotton batiste, china silk, cotton/silk batiste blend, cotton flannel, fusible interfacing

Underlining is stitched 1.3 cm (1/2 inch) wide to the shell prior to sewing and acts as a single layer. The seam allowances of the underlining are then trimmed to the stitched line to prevent bulk. If you want extra support or to protect critical areas that will receive a lot of stress from being bent and sat on (elbows, rumps), hand baste the underlining to the body of the shell parallel to the grain of the fabric.

If you use fusible interfacing as an underlining, fuse it to the shell proir to sewing. Seam allowances are optional.

Tip: cotton flannel not only adds support, but also insulates. That means you can omit the interlining, but still have a warm garment.

3. interfacing: gives support and shape to e.g. collars, lapels, facing, cuffs, ... 

- fusible/nonfusible interfacing

It is fused/hand basted directly to the shell. Seam allowance is required for nonfusible interfacing and optional for fusible interfacing.

Tip: when a garment is underlined, interfacing may not be necessary, because both the garment and the facing sections are underlined. So the two layers of underlining between the garment and the facing provide an adequate interfacing. Or if I put it like that: the pattern pieces that are interfaced, don't have to be underlined.

4. interlining: adds insulation

- cotton flannel, lambswool interlining, lightweight thinsulate, thin microfleece, chamois

It is made from the lining pattern; collars, pockets, double-breasted section, belts etc. are not interlined.

Interlining is stitched 1.3 cm (1/2 inch) wide to the lining individually and acts as a single layer. The seam allowances of the interlining are then trimmed to the stitched line to prevent bulk.

5. lining: a finishing layer that covers the inside construction of the coat

- satin, tafetta, twill, jacquard, bemberg rayon, silk, polyester, acetate, flannel back satin

Tip: flannel satin serves both as a lining and adds insulation. That means you can omit the interlining, but still have a warm garment.

I hope this helps. ;)

I am slowly making progress on my coat. The fabric is cut, now I have to put the pieces together. In the next post I will be showing you how to underline and interface the garment.

Have a nice day!

Making a coat

It is high time to sew a coat and I am making this one:

I love that it is collarless, the buttons are invisible, it has a band to accentuate the waist, and it is slightly gathered at the waist. The pattern is made for short misses, I hope it will fit, because I won't be making a test coat. I will be posting about different stages of making it. I am so excited to see it done! :)

I have never made a coat before. Have you?